BurgRoyce

Member
Jul 17, 2022
142
195
So besides them being shown to exist...have they actually been given any purpose, is what I'm asking. You have to be specific to get it, and I don't think the MC has actually mentioned it ONCE since he was given it. I mean my Kane is K9, so I don't know if it's only relevant in like K4 and below, but I'm only asking if it's actually relevant at all or it's just been forgotten.
IIRC Otto gave the bracelet to Nadia (the scene of them in the submarine).
How Otto got it? I don't know or remember :LOL:
 
  • Like
Reactions: DirectXD1943

Akeymu

Active Member
Jan 22, 2020
518
507
Careful now, please don't confuse folks... there's no need for the SaveFixer in Season 2 (yet, not until v0.9 in the future and beyond).

So folks fully understand: do NOT copy your Season 1 saves inside Season 2... it does not work that way. You'll be starting Season 2 without any save files... all you need is the export data that was made at the end of Season 1 (these are data files, not "save" files... two totally different things). This export data is already on your system (if you used the same system to export Season 1). You do not have to manipulate any files/directories at all. No copy/pasting, no shenanigans.

Again, do NOT attempt to copy and load your Season 1 saves inside Season 2. It doesn't matter if you played modded or unmodded, it simply won't work.

I'm writing this so it's very clear what one is required to do which are two very simple steps (modded or unmodded in Season 1 doesn't matter at all):
  • Install the Season 2 VN (only one available currently and is the "Testing" version, it has bugs, it is NOT final)
  • Push "Start" at the main menu which will present the import process and show you up to 8 of your Season 1 exports (or less if you exported less).
That's it, nothing else to it. It's easy-peasy, so don't confuse it. If you are confused then read this post again... slowly.

I promise you I'm correct. I'm halfway done with mod porting for Season 2 and have imported several times... I wouldn't bullshit you. Just follow the very simple instructions... it's easier than boiling water tbh.
well this isnt true at all, as i saved all my files on the mask screen and not a single file is being ported into season 2
 
  • Like
Reactions: DirectXD1943

gregers

Forum Fanatic
Dec 9, 2018
5,031
6,519
well this isnt true at all, as i saved all my files on the mask screen and not a single file is being ported into season 2
  1. Don't just make a regular save at the mask screen at the end of 0.7b. Wait for the prompt to save a named data file.
  2. Click Start (not Load) in 0.8 to import the saved data.

Those are the two steps in the regular (unmodded) version. I don't play with mods so can't speak to them, but Sancho is usually competent enough to know what he's doing so I'd expect that to work just as well.
 

Akeymu

Active Member
Jan 22, 2020
518
507
so whats going on with the saves, all 7 files i made are not broken and cant seem to get anything to load over even tho i saved on final save export mask screen and then had the v7final version, all in all i get no saves loaded and only this trace back error on the none
 

lordfridge9

Emperor of Universe 7
Donor
Aug 24, 2017
3,273
3,938
Karlsson's Gambit [v0.7 TEST] [Grym Gudinna Games]

COMPRESSED: Win/Linux/Mac:

Karlsson's Gambit v0.7 TEST





Hi,

Do you have a 0.7 final (compressed ) laying around somewhere? I'd like to start this, but not at the cost of 14 gigs :LOL:
 
  • Like
  • Angry
Reactions: V&M and Ninjaman2

jameshds

Newbie
Feb 5, 2021
81
83
Do I have to install version 0.7b final to be able to import the saves? I have version 0.7a final. would that work? I have used test versions many times, and my saves won't work. what should I do? I have version 0.7a final and 0.8 test part I
 

lordfridge9

Emperor of Universe 7
Donor
Aug 24, 2017
3,273
3,938
Do I have to insteall version 0.7b final to be able to import the saves? I have version 0.7a final. would that work? I have used test versions many times, and my saves won't work. what should I do? I have version 0.7a final and 0.8 test part I
I haven't played this at all
 
  • Like
Reactions: jameshds

longinius

Newbie
May 11, 2017
70
129
Do I have to install version 0.7b final to be able to import the saves? I have version 0.7a final. would that work? I have used test versions many times, and my saves won't work. what should I do? I have version 0.7a final and 0.8 test part I
ive tried it with both 0.7a and 0.7b
 
  • Like
Reactions: jameshds

Sancho1969

Message Maven
Modder
Donor
Jan 19, 2020
12,382
49,135
well this isnt true at all, as i saved all my files on the mask screen and not a single file is being ported into season 2
Of course what I stated here is true. If you require a visual example of the very simple process of exporting data from Season 1 see post here.

It doesn't matter if one plays modded or unmodded, the process is exactly the same. The only difference is that the mod physically tells you at the Mask screen in Season 1 to make the export via a notification. The mask screen itself has the input to name the export data as shown in the pic (for those who can't read).
 

longinius

Newbie
May 11, 2017
70
129
Of course what I stated here is true. If you require a visual example of the very simple process of exporting data from Season 1 see post here.

It doesn't matter if one plays modded or unmodded, the process is exactly the same. The only difference is that the mod physically tells you at the Mask screen in Season 1 to make the export via a notification. The mask screen itself has the input to name the export data as shown in the pic (for those who can't read).
and as i responded to you yesterday i must be doing something wrong then as it doesnt give me the option to save with a name
 

Sancho1969

Message Maven
Modder
Donor
Jan 19, 2020
12,382
49,135
and as i responded to you yesterday i must be doing something wrong then as it doesnt give me the option to save with a name
Insure you are using v0.7b of Season 1. I've stated several times last year during release of v0.7 and v0.7a that those versions were fucked up, and highlighted what Tess needed to do to correct. It was resolved in v0.7b, that's what you need.

If you have v0.7b then you will get the prompt for the data file naming as I linked in my last post, I assure you.
 

longinius

Newbie
May 11, 2017
70
129
Insure you are using v0.7b of Season 1. I've stated several times last year during release of v0.7 and v0.7a that those versions were fucked up, and highlighted what Tess needed to do to correct. It was resolved in v0.7b, that's what you need.

If you have v0.7b then you will get the prompt for the data file naming as I linked in my last post, I assure you.
this is v07.b and see image no prompt click on save it just goes straight to the save page
 

gregers

Forum Fanatic
Dec 9, 2018
5,031
6,519
this is v07.b and see image no prompt click on save it just goes straight to the save page
See item 1 on this very long and complicated list.

  1. Don't just make a regular save at the mask screen at the end of 0.7b. Wait for the prompt to save a named data file.
  2. Click Start (not Load) in 0.8 to import the saved data.

Those are the two steps in the regular (unmodded) version. I don't play with mods so can't speak to them, but Sancho is usually competent enough to know what he's doing so I'd expect that to work just as well.
I.e. do not click on save, just click through another screen or two for the right prompt:

1706908760736.png
 

Sancho1969

Message Maven
Modder
Donor
Jan 19, 2020
12,382
49,135
this is v07.b and see image no prompt click on save it just goes straight to the save page
For fuck's sake man... I gave you a visual example with a massive red arrow....

Just like the above post which is only repeating the same thing I've been telling you.... type a name for the data file at the bottom of the Mask screen.... and just like the original post you quoted me on saying it's "not true" I state to NOT simply make a game save... make a data save. I tell you in that post they are two completely different things.

If you don't read the post and don't even look at the massive red arrow showing you exactly where the export naming box is... then no one can help you... this is not rocket science. Just read the posts.... very slowly if necessary.
 
4.50 star(s) 165 Votes